Conducted module

Last Updated on : 2020-07-21 09:34:52

This document introduces the certification module listed in the sample store. Customers can purchase the certification module through this link(purchase the certification module).

Conducted module is used for some conducted test items in the authentication, the firmware inside the module is fixed frequency firmware, will weld a RF line, RF line is SMA head, connected to the spectrum analyzer and other equipment test.The module leads 3.3V, GND, RX and TX to the USB serial port board, which can be connected to the computer through the USB serial port board, and the module can be fixed frequency through the test software or test instructions.

Conducted test items

With the CE, FCC, SRRC, for example

CE

  • Test standard:EN 300 328
  • Download standard: ETSI EN 300328 V2.2.2.pdf
  • Test items RF output power(EIRP)、Power spectral density、Power spectral density、Occupied channel bandwtih Transmitter unwanted emissions in the out of band、Transmitter spurious emssions - Conducted mode、 Receiver spurious emissions - Conducted mode

FCC

  • Test standard:Part 15C 15.247
  • Download standard:Part 15C 15.247.pdf

  • Test items Conducted peak output power、6dB bandwidth、Conducted emission、Power spectral density、Band edge、 Spurious conducted emissions for transmitter

SRRC

  • Test standard:
  • Download standard:File N0.353.pdf
  • Test items RF output power(EIRP)、Power spectral density、Carrier frequency tolerance、Occupied channel bandwtih、Transmitter unwanted emissions in the out of band、Transmitter spurious emssions - Conducted mode

Download Test tools

Your advice
Feedback effective questions, more chances to winsandwich development board and other small gifts
0/200
Your advice
Feedback effective questions, more chances to winsandwich development board and other small gifts
0/200