How to view the WIFI module loge

How to view the WIFI module log

In the process of interfacing, when the network cannot be configured, causes of the failure in network configuration can be located via viewing the log information of the module.

1. Connecting

1.1 TYWE3S General Module

Lead out the GPIO2 and GND of the module to connect with the RX and GND of the module for switching to TTL from USB respectively.

1.2 TYWE1S General Module

Lead out the U0TX and GND of the module to connect with the RX and GND of the module for switching to TTL from USB respectively.

2.Enabling Serial Port Debugging Helper

  1. Set the serial port debugging helper:

    Baud rate: 74880; data bit: 8; parity check bit: N/A; stop bit: 1; data flow control: N/A

  2. Match the COM port and open the serial port

3.View the log

  1. Send (or save first and send) the screenshot of the log to the engineer of Tuya

400 Call

Consult

400-881-8611