Product Networking test

Please test networking function of product by iOS and Android phone.

**1. ** Network Configuration
Item Triggering Method
EZ network configuration mode Record the logic of the device entering the EZ network configuration mode. For example, press and hold a button to make the device in any state enter the EZ network configuration mode.
AP network configuration mode Record the logic of the device entering the AP network configuration mode. For example, press and hold a button to make the device in EZ network configuration mode enter the AP network configuration mode.
Wi-Fi indicator If the device is in EZ network configuration mode, the Wi-Fi indicator blinks quickly at 0.5s intervals.
If the device is in AP network configuration mode, the Wi-Fi indicator blinks slowly at 1.5s intervals.
If Wi-Fi is configured but the device is not yet connected to a router, the Wi-Fi indicator is steady off.
If Wi-Fi is configured and the device is connected to a router, the Wi-Fi indicator is steady on.
Version 03 supports more states, which can be supplemented.
EZ network configuration result Confirm that EZ network configuration was successful.
AP network configuration result Confirm that AP network configuration was successful.
Removing a device If you remove a device from the app, the device enters the EZ network configuration state with the network settings deleted by default.
Initializing a device If you restore the factory settings of a device through the app, the device enters the EZ network configuration state with the network settings deleted by default and the default device name restored.
**2. ** Product Test
Test method Record the product test method. For example, power on a device, and 5s later, press and hold a button. If you hear a “click”, the device has entered the product test state.
Test success rate The testing router is 3 m to 5 m away from the tested device. Use multiple methods to make the device enter the product test state, perform multiple tests, and calculate the test success rate.
Test success indicator Confirm whether a successful test is indicated correctly. Check whether a test is successful based on the displayed signal strength level within the range of 0 to 100.
Test failure indicator Confirm whether a test failure is indicated correctly. If a test fails, the displayed result shows that the tested device is unauthorized or that no product test signal was detected.
**3. ** Panel
Content loading After network configuration is successful, related information is correctly loaded onto the panel without data loss.
Language support Check whether the panel supports the languages of Chinese and English. No anomalous fields exist (in at least two languages).
UI adaptation The UI properly adapts to screens of mainstream mobile phones. The UI displays complete text content, particularly the content not in Chinese. The fonts, colors, and icons are consistent with the design.
**4. ** App Control Panel and Device Status Reporting
(Used for product function test)
Control command delivery If the app delivers a control command to a device, the app must receive a response from the MCU; otherwise, the app may fail to synchronize the device status.
Reporting device status upon operation When a device function is invoked, the device must immediately report its status to the module; otherwise, the app may fail to synchronize the device status.
Reporting real-time device status If the status of a working device changes, the device must immediately report its status; otherwise, the app may fail to synchronize the device status.
Reporting device status upon initialization If a device is powered off and then on again, the device must report its status upon initialization. The device usually reports the status before it is powered off. Alternatively, the device reports a fixed value based on the initialization definition. For example, if a device reports a fault before it is powered off, the device needs to report its status before it is powered off when it is powered on again and initialized. This is because the power cycling may not have rectified the fault.
LAN control If the router to which a mobile phone and device are connected is disconnected from the Internet, the device can still be controlled through the mobile phone.
Internet control
Device renaming If you rename a device and return to the control panel, the control panel must display the new device name; otherwise, there is a bug.
**5. ** Third-party Voice Function
Google Home Confirm and record the voice functions that the device supports, for example, fan switch-on, switch-off, and wind speed adjustment.
Amazon Alexa Confirm and record the voice functions that the device supports, for example, fan switch-on, switch-off, and wind speed adjustment.
IFTTT Confirm and record the voice functions that the service supports, for example, fan switch-on and switch-off.
Tmall Genie Confirm and record the voice functions that the device supports, for example, fan switch-on, switch-off, and wind speed adjustment.
DingDong Confirm and record the voice functions that the device supports, for example, fan switch-on, switch-off, and wind speed adjustment.
**6. ** Others
Grouping The same devices can be added to a group.
Scenario association Scenarios can be associated and performed.
Quick toggle Quick toggles, for example, a main switch, on the device list page are available.

400 Call

Consult

400-881-8611